Ruijie RG-ES Series Switches ES_1.0(1)B1P20 Firmware(ES205GC-P, ES209GC-P)
Please rate this document.
Please leave your suggestions here.
200 characters leftIf Ruijie may contact you for more details, please leave your contact information here.
* I understand and agree to Terms of Use and acknowledge Ruijie's Privacy Policy.
Thank you for your feedback!
|
|
|
| ||
|
| ||||
|
| Ruijie RG-ES Series Switches |
| ||
|
| ESW_1.0(1)B1P20 Release Notes |
| ||
|
|
|
| ||
|
| ||||
| Document Version: V1.2 Date: 2023.02.19 Copyright © 2023 Ruijie Networks |
| |||
B1P20.files/image022.jpg){kind=small}
B1P20.files/image023.jpg)
Copyright © 2023 Ruijie Networks
All rights are reserved in this document andthis statement.
Any reproduction,excerption, backup, modification, transmission, translation or commercial useof this document or any portion of this document, in any form or by any means,without the prior written consent of Ruijie Networks is prohibited.
Trademarks including B1P20.files/image024.jpg){kind=small}
,B1P20.files/image025.jpg){kind=small}
,B1P20.files/image026.gif){kind=small}
areowned by Ruijie Networks.
All other trademarks or registered trademarksmentioned in this document are owned by their respective owners.
Disclaimer
The products, services, or features you purchaseare subject to commercial contracts and terms. Some or all of the products,services or features described in this document may not be within the scope ofyour purchase or use. Unless otherwise agreed in the contract, Ruijie Networksdoes not make any express or implied statement or guarantee for the content ofthis document.
Due to product version upgrades or otherreasons, the content of this document will be updated from time to time. RuijieNetworks reserves the right to modify the content of the document without anynotice or prompt.
This manual is for reference only. RuijieNetworks endeavors to ensure content accuracy and will not shoulder anyresponsibility for losses and damages caused due to content omissions,inaccuracies or errors.
Intended Audience
This document is intended for:
l Network engineers
l Technical support and servicing engineers
l Network administrators
Technical Support
l The official website of Ruijie Reyee: https://www.ruijienetworks.com/products/reyee
Conventions
1. Signs
The signs used in this document are describedas follows:
B1P20.files/image010.gif){kind=small}
Warning
An alert that calls attention to importantrules and information that if not understood or followed can result in dataloss or equipment damage.
B1P20.files/image006.gif){kind=small}
Caution
An alert that calls attention to essentialinformation that if not understood or followed can result in function failureor performance degradation.
B1P20.files/image002.gif){kind=small}
Note
An alert that contains additional orsupplementary information that if not understood or followed will not lead toserious consequences.
B1P20.files/image004.gif){kind=small}
Specification
An alert that contains a description ofproduct or version support.
2. Note
This manual introduces the versioninformation, revision history, features, resolved issues, open issues,supported platforms, software upgrading and related documentation.
Contents
VersionInformation
| Version Number | ESW_1.0(1)B1P20,Release(10141311) |
| Version Type | Official Release |
| Applicable Products | RG-ES Series Switches: RG-ES205GC-P: 1.0x, 1.1x, 1.2x, 1.3x, 1.4x, 1.5x, 2.0x RG-ES209GC-P: 1.0x, 1.1x, 1.2x, 1.3x, 1.4x, 1.5x, 1.6x, 1.7x, 1.8x |
| Applicable Clients | SMB Channel Clients |
| Release Type | Official Release |
| Release Date | 2023-02-19 |
| Based Version Number | ESW_1.0(1)B1P10 |
| Description | The encrypted transmission of the username and password/Update Policy (Official Release) |
| Version Number | ESW_1.0(1)B1P20,Release(10141311) |
| Version Type | Official Release |
| Applicable Products | RG-ES Series Switches: RG-ES205GC: 1.0x, 1.1x RG-ES206GC-P: 1.0x, 1.1x RG-ES208GC: 1.0x, 1.1x RG-ES210GC-LP: 1.0x, 1.1x |
| Applicable Clients | SMB Channel Clients |
| Release Type | Official Release |
| Release Date | 2023-02-19 |
| Based Version Number | ESW_1.0(1)B1P10 |
| Description | The encrypted transmission of the username and password/Update Policy (Official Release) |
| Version Number | ESW_1.0(1)B1P20,Release(10130318) |
| Version Type | Official Release |
| Applicable Products | RG-ES Series Switches: RG-ES216GC: 1.0x, 1.1x, 1.2x, 1.3x, 2.0x, 2.1x, 3.0x RG-ES218GC-P: 1.0x, 1.1x, 1.2x, 1.3x, 1.4x, 2.0x, 2.1x, 2.2x, 3.0x, 3.1x RG-ES224GC: 1.0x, 1.1x, 1.2x, 1.3x, 2.0x, 2.1x, 3.0x RG-ES226GC-P: 1.0x、1.1x, 1.2x, 2.0x, 2.1x, 2.2x, 2.3x, 3.0x, 3.1x |
| Applicable Clients | SMB Channel Clients |
| Release Type | Official Release |
| Release Date | 2023-02-07 |
| Based Version Number | ESW_1.0(1)B1P10 |
| Description | The encrypted transmission of the username and password/Update Policy (Official Release) |
1.1 RevisionHistory
| Release Date | Version Number | Status |
| 2022-08-05 | ESW_1.0(1)B1P20,Release(09200309) | Available |
| ESW_1.0(1)B1P20,Release(09192914) | Available | |
| ESW_1.0(1)B1P20,Release(09200219) | Available | |
| ESW_1.0(1)B1P20,Release(09200219) | Available | |
| 2022-04-29 | ESW_1.0(1)B1P10,Release(09162710) | Available |
| 2022-03-12 | ESW_1.0(1)B1P9,Release(09151120) | Available |
| 2021-10-11 | ESW_1.0(1)B1P8,Release(08213009) | Available |
| 2022-08-22 | ESW_1.0(1)B1P20,Release(09201814) | Available |
Features
1.1 New Features
| Features | Requirement Source | Description |
| Upgrade switch | Requirement Source | Reverting to earlier versions can be disabled on ES series switches. |
| Fan | Requirement Source | The hardware versions 2.3 and 3.2 of RG-ES218GC-P switch deal with loud fan noise by stopping the fan from running. The hardware version 2.3 of RG-ES226GC-P switch deals with loud fan noise by stopping the fan from running. |
| New hardware version | Requirement Source | New hardware versions of RG-ES218GC-P switch are supported: 2.2 and 3.1. New hardware versions of RG-ES226GC-P switch are supported: 2.3 and 3.1. |
ResolvedIssues
| Bug ID | Description |
| NA | When the port is configured as a trunk port on Ruijie Cloud, the network is down if the PVID does not exist. |
| NA | When the length of the password delivered to all devices on the network is greater than 16 bits, the ES switch is rebooted. |
| NA | When users enter the Web management system of RG-ES205C-P, RG-ES205GC-P, RG-ES209C-P, RG-ES209GC-P, RG-ES205GC, RG-ES206GC-P, RG-ES208GC, RG-ES210GC-LP, RG-FS306-D, or RG-FS306-P switch, and click System Settings > Account Settings, garbled text is displayed on the page. |
| NA | The port data of RG-ES216GC, RG-ES218GC-P, RG-ES224GC, RG-ES226GC-P, RG-FS303_AB, RG-FS306-D, or RG-FS306-P switch are not displayed on the On-Site Mode page of the App. |
| NA | After RG-ES216GC, RG-ES218GC-P, RG-ES224GC, RG-ES226GC-P, or RG-FS303_AB switch is upgraded through the cloud, all the downlink ports are disabled. |
| NA | The PoE device cannot supply power to some powered devices. |
OpenIssues
| Bug ID | Description | Workarounds |
| NA | NA | NA |
SupportedPlatforms
1.1 Hardware Platform
| Hardware Type | Model | Hardware Version Number |
| Switch | RG-ES205GC-P | 1.0x, 1.1x, 1.2x, 1.3x, 1.4x, 1.5x, 2.0x |
| Switch | RG-ES209GC-P | 1.0x, 1.1x, 1.2x, 1.3x, 1.4x, 1.5x, 1.6x, 1.7x, 1.8x |
| Switch | RG-ES205GC | 1.0x, 1.1x |
| Switch | RG-ES206GC-P | 1.0x, 1.1x |
| Switch | RG-ES208GC | 1.0x, 1.1x |
| Switch | RG-ES210GC-LP | 1.0x, 1.1x |
| Switch | RG-ES216GC | 1.0x, 1.1x, 1.2x, 1.3x, 2.0x, 2.1x, 3.0x |
| Switch | RG-ES218GC-P | 1.0x, 1.1x, 1.2x, 1.3x, 1.4x, 2.0x, 2.1x, 2.2x, 3.0x, 3.1x |
| Switch | RG-ES224GC | 1.0x, 1.1x, 1.2x, 1.3x, 2.0x, 2.1x, 3.0x |
| Switch | RG-ES226GC-P | 1.0x, 1.1x, 1.2x, 2.0x, 2.1x, 2.2x, 2.3x, 3.0x, 3.1x |
1.2 InteroperabilityInformation
| Product | Description | Hardware Model | Software Version Number |
| NA | NA | NA | NA |
| NA | NA |
Software Upgrading
1.1 Upgrade File
| File Title | ESW_1.0(1)B1P20_ES205C_10141311.tar.gz ESW_1.0(1)B1P20_ES205C_10141311.bin |
| Description | Web upgrade package (with a file extension of “bin”) and Cloud AC upgrade package (with a file extension of “tar.gz”) |
| File Size | tar.gz: 283,435Bytes bin: 929,232Bytes |
| Applicable Products | RG-ES Series Switches: RG-ES205GC-P: 1.0x, 1.1x, 1.2x, 1.3x, 1.4x, 1.5x, 2.0x RG-ES209GC-P: 1.0x, 1.1x, 1.2x, 1.3x, 1.4x, 1.5x, 1.6x, 1.7x, 1.8x |
| MD5 Checksum | tar.gz: AB57FABA2C963A208173B2D60C159D0A bin: 8EB414E68E64B68D0FB853E801796733 |
| Software Version | E ESW_1.0(1)B1P20,Release(10141311) |
| File Title | ESW_1.0(1)B1P20_ES210GC_10141311.tar.gz ESW_1.0(1)B1P20_ES210GC_10141311.bin |
| Description | Web upgrade package (with a file extension of “bin”) and Cloud AC upgrade package (with a file extension of “tar.gz”) |
| File Size | tar.gz: 276,768Bytes bin: 919,964Bytes |
| Applicable Products | RG-ES Series Switches: RG-ES205GC:1.0x, 1.1x RG-ES206GC-P: 1.0x, 1.1x RG-ES208GC: 1.0x, 1.1x RG-ES210GC-LP: 1.0x, 1.1x |
| MD5 Checksum | tar.gz: 4567B543C56919D565FCC22EC142F4CE bin: F5E6381C761FCD0CEEDFD3D98DC64854 |
| Software Version | ESW_1.0(1)B1P20,Release(10141311) |
| File Title | ESW_1.0(1)B1P20_ES218GC-P_10130318.tar.gz ESW_1.0(1)B1P20_ES218GC-P_10130318.bin |
| Description | Web upgrade package (with a file extension of “bin”) and Cloud AC upgrade package (with a file extension of “tar.gz”) |
| File Size | tar.gz: 331,343Bytes bin: 875,520Bytes |
| Applicable Products | RG-ES Series Switches: RG-ES Series Switches: RG-ES216GC: 1.0x, 1.1x, 1.2x, 1.3x, 2.0x, 2.1x, 3.0x RG-ES218GC-P: 1.0x, 1.1x, 1.2x, 1.3x, 1.4x, 2.0x, 2.1x, 2.2x, 3.0x, 3.1x RG-ES224GC: 1.0x, 1.1x, 1.2x, 1.3x, 2.0x, 2.1x, 3.0x RG-ES226GC-P: 1.0x, 1.1x, 1.2x, 2.0x, 2.1x, 2.2x, 2.3x, 3.0x, 3.1x |
| MD5 Checksum | tar.gz: C80FEC118E7E5BC236C212CF5FFC6AFF bin: 9D16C7CD8C3B6E16BD5837551AD10488 |
| Software Version | ESW_1.0(1)B1P20,Release(10130318) |
1.2 Requirements
The system can be upgraded from a previous version.
1.3 Important Pointsto Remember
l Upgradecan be performed in the field only after successful experimental verification.
l Pleaseperform a database backup before upgrading the device.
l Pleasedo not power off the device, reset the system or remove any modules if afailure prompt appears.
l Afteran upgrade to the new version, navigate to Eweb > Local > Home> Basics to verify the version information, including the softwareversion number, SN and model. See Upgrade Procedure for details.
1.4 Upgrade Procedure
l Connect the device with a PC and configure thePC with an IP address in network segment 10.44.77.10/255.255.255.0.
l Power on the device. After the system LED turnssolid on, open a browser, enter 10.44.77.200 into the address bar and pressEnter.
l Log into the system and complete wizardconfiguration.
l Use the bin file for online upgrade.and click Upload.After an upgrade to the new version, verify the version information.
l During the upgrade and downgrade, pay attentionto the prompt messages. If failures occur, please save the log and contact usfor technical assistance.
l During the upgrade and downgrade, it isrecommended you not power off or reset the system, or plug/unplug any module.
Note
If you forgot you password, press and holdthe Reset button for over 5 seconds, and the password will be reset tothe default setting. Upon the next reboot, you can select restoration to eitherfactory settings or the previous version.
Related Documentation
| Document Title | Description |
| Ruijie RG-ES200 Series Switches Hardware Installation and Reference Guide | Provide hardware installation guide |
| Ruijie Reyee RG-ES Switch Web-based Configuration Guide | Provides guidance on web-based configuration. |
Note
The documentation may update without prior notification. Pleaseaccess Ruijie Networks at https://www.ruijienetworks.com/products/reyee for the latest documentation.
